Why Does the Circular Saw Blade on your Circular Saw Get Hot and Burn the Edges of the Wood Being Cut?

The Speed at Which Wood Enters the Machine is Proportional to the Speed at Which the Machine Rotates

Feeding faster is sometimes not possible when your wood saw does not have enough power to make the cut quickly enough and the saw labors hard and may stall trying to feed fast

So the Solution of Wood Saw in This Case

1. You need a more powerful saw motor
2. Sharpen the blade professionally or get a new sharp blade(because a dull blade can make feeding very hard)
3. Take a shallower cut, make two passes if necessary
4. Use a thin kerf blade
5. Make sure your saw is not starved for voltage by too long an extension cord
6. Use the correct blade type

If you are ripping a board (with the sawdust) you should use a 24 tooth rip blade

If you use a blade with lots of teeth it will definitely heat excessively and become hard to push

And If your table saw is small then you have to feed the board much more slowly

Make sure that the front and end of the material you cut are in the same line

The carbide tipped blade is worth to buy. Steel blades are worthless and never worth purchasing

If you are going to be a woodworker get a real table saw and you will enjoy your woodworking