Would you Like to Know the Purchase and Safety of Taper Shank Twist Drill Bits?

Taper Shank Twist Drill Bit is a Production Process Using Milling and Extrusion

Taper shank drill bit drill through holes or blind holes in solid materials and can expand the existing holes

It is widely use hole processing tool, usually with a diameter ranging from 0.25 to 80 mm

What Principle Should be Used When Selecting Taper Shank Drill Bit?

The Principle of Practicality

1. The structure and design parameters of the taper shank twist drill bits should have clear and reasonable functions
2. It must meet the production requirements and product quality requirements of the taper shank twist drills
3. The minimize Labor productivity must also adapt to the product and the production of taper shank twist drills, using technological methods

The Principle of Reliability

1. Reliability is an important indicator of the quality of the beam taper shank twist drills
2. The reliability design method can ensure that the taper shank twist drill bits can complete the specified function under the specified working conditions and within the specified working time

The Principle of Creativity

1. The design of taper shank twist drills bits includes both inheritance and innovation
2. It is not necessarily the best solution, it can selectively absorb the reasonable parts of the existing design
3. Only by inheriting innovation can we make a qualitative leap in equipment design or system design

Optimization Principles of Taper Shank Drill Bit

1. Consider for multiple design schemes taper shank twist drills
2. After inference analysis, calculation and comparison, the equipment design, system selection, structural form, manufacturing, and use conditions can reach the best level and get the best protection
3. Require functionally to meet product use requirements
4. Achieve optimal results in terms of technology and economy

Taper shank twist drills provide more guarantee for the safety of workers

It is necessary to control its daily maintenance, so as to bring a perfect working environment and effect on the use of cone shank twist drills

So, What Safety Precautions Should be Paid Attention to During the Work of Taper Shank Twist Drill Bit?

Preparations Before Starting

1. Carefully check whether all parts of the drilling machine are complete
2. Is the screw loose and whether the control buttons are flexible and reliable
3. Inspect the drill pipe and drill bit for damage and the support frame for breakage

Normal Boot

1. Idle the drilling machine for 1 to 2 minutes, and listen carefully for abnormal sounds and noises
2. Appropriately adjust the drilling speed
3. There is no vermiculite in the coal seam

Shutdown

1. After drill a hole normally, we should remove the drill rod, drill bit and drilling frame in time
2. Place neatly the removed drill rods, drill bits, and support frames and clean them without affecting pedestrian safety
3. The explosion-proof switches, cables, and control buttons of the drilling machine are well organized
4. After the shutdown, clean the floating coal of the drilling body in time
5. Clean and arrange neatly of the oil pollution of the drilling body

After reading this article, you will know the selection and use of the taper shank drill bit

Do you know the other drill bits?