What are the Specific Steps for the Maintenance and Replacement of Aluminum Cutting Blades?

Is it Necessary to Repair and Replace the Aluminum Cutting Blade？

The aluminum cutting blade needs cleaning and regular inspection.

Introduction of Aluminum Saw and Reasons for Replacement

1. Aluminum saw blade is a normal cutting tool for aluminum material processing.
2. The quality of cemented carbide saw blade is closely related to the quality of processed products.
3. It is a cemented carbide circular saw blade specially used for cutting, sawing, milling and grooving of various aluminum alloy materials.
4. Aluminum saw blade is a kind of consumable. When the work is cutting loud, and the cutting work piece has burrs, the saw blade should be replaced.

Inspection and Cleaning Method and Reasons of Aluminum Cutting Blade

① Clean the Back of the Inner Pressure Plate to Prevent the Mixture of Sawing and Cutting Oil from Solidifying and Sticking to the Back

Reason:

1. This can prevent the saw blade from heating due to its friction and heat.
2. Affects its stress, which causes the aluminum saw blade to drift Normal use.

② Clean the Surface of the Inner Platen and the Outer Platen, There Should be no Aluminum Shavings and Other Debris on it

Reason:

1. If there are aluminum shavings and debris on it, installing the saw blade will affect the aluminum sawing.
2. The flatness of the blade during cutting results in burrs and saw marks on the work piece aluminum saw blade.

③ After Installing a New Aluminum Saw Blade or Alloy Dressing Blade, You Should Use a Dial Indicator to Check its Periphery

Reason:

1. Under the normal condition of the main shaft and pressure plate, the new blade bounce is 0.06.
2. And the dressing blade should be It is between 0.06 and 0.1.
3. The main shaft and platen should also be checked regularly to ensure that the equipment is normal.

Of course, the specific situation depends on the operating conditions of the aluminum saw blade machinery and equipment.