1. Material: Carbon Steel With Heat Treatment
2. Shank：SDS: Plus Shank
3. Flute: Single Flute with Stem
4. Tip: Single Spur with Screw Point
5. Surface Finish: Black & Bright
6. Package：One Piece in One PVC Pouch Or In One PVC Tube or Double Blister
SDS Auger Drill Bit
SDS Plus Shank Shank Single Flute Wood Auger Drill Bit with Stem for Wood Drilling
- Product Details
- Factory
- Material
| Product description | |
| More Choice For You: Home > Wood Drill Bit | |
| Product name | SDS Plus Shank Shank Single Flute Wood Auger Drill Bit with Stem for Wood Drilling |
| Material | High Carton Steel With Heat Treatment |
| Shank | SDS Plus Shank (We Also Have Quick Change Hex Shank, Hex Shank, Double R Hex Shank, Hand Use Shank) |
| Flute | Single Flute (We Also Have Double Flutes, Three Flutes and Four Flutes) |
| Surface finish | Black & Bright (We Also Have Color Painting and Titanium Coated) |
| Package | One Piece in One PVC Pouch, PVC Tube or PVC Double Blister |
| Features | 1. Heat-treated and tempered high-grade carbon steel for long use life. 2. Screw tip pulls the auger through the wood for added ease of use. 3. SDS Plus shank for secure chuck grip. 4. Precision ground back tapered flute prevents the drill from jamming in holes and provides easy tool removal. 5. Tough, sharp, well made, creates deep, clean holes quickly and cleanly in hard or softwood. |
| Product Size | |||
| Diameter | Overall Length | Diameter | Overall Length |
| mm | mm | Inch | Inch |
| 6-26 | 100 | 1/4″-1″ | 4″ |
| 6-40 | 125 | 1/4″-1-9/16″ | 5″ |
| 6-40 | 155 | 1/4″-1-9/16″ | 6″ |
| 6-40 | 200 | 1/4″-1-9/16″ | 8″ |
| 6-40 | 230 | 1/4″-1-9/16″ | 9″ |
| 6-40 | 300 | 1/4″-1-9/16″ | 12″ |
| 6-40 | 400 | 1/4″-1-9/16″ | 16″ |
| 6-40 | 460 | 1/4″-1-9/16″ | 18″ |
| 6-40 | 500 | 1/4″-1-9/16″ | 20″ |
| 6-40 | 600 | 1/4″-1-9/16″ | 24″ |
| 6-40 | 800 | 1/4″-1-9/16″ | 32″ |
| 6-40 | 1000 | 1/4″-1-9/16″ | 40″ |
| * Custom-tailor would be available against customers’ requirements | |||
1. Made from high quality, hardened steel for added durability.
2. SDS plus shank applies to all SDS plus chuck.
3. The extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications.
4. The solid center design provides extra rigidity while boring.
5. Screw point tip allows the bit to self-feed for ease of drilling.
6. Single spur, cutter, and side lip are designed for boring through creosoted poles without clogging, binding, or stopping to clear chips
7. For use with SDS plus chuck corded and cordless drills.
How to Use:
■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.
For your Safety:
We recommends the use of following personal protective equipment:
■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)
Important Note:
Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.
English 
French 
Portuguese 
German 
Spanish 
Turkish