Chisel SDS Bit
SDS Plus Shank Point and Flat Chisel Cranked Chisel Set with Carbide Tipped for SDS Rotary Hammer for Drilling Concrete Tile
- Contain 3 chisels: Point Chisel, Flat Chisel, and Wide Flat Chisel.
- For Long life, safe chiseling & reliable demolition.
- With its sharp edge design for maximum masonry impact.
- Removes scale, rust, concrete, masonry, brick, stone, and so on.
- Suitable for sds plus shank electric hammer.
- Product Details
- Factory
- Material
SDS Plus Shank Point and Flat Chisel Cranked Chisel Set
Product Name
|
SDS Plus Shank Point and Flat Chisel Cranked Chisel Set with Carbide Tipped for SDS Rotary Hammer for Drilling Concrete Tile
|
Material
|
HSS
|
Color
|
Polish
|
Name
|
electric hammer chisel
|
Used
|
Masonry drilling
|
Product Size | |||||
SDS Plus Chisel | |||||
Item | Head Diameter (mm) | Total Length (mm) | Picture | ||
Point Chisel | / | 140 | |||
250 | |||||
Flat Chisel | 20 | 140 | |||
250 | |||||
40 | 140 | ||||
250 | |||||
Flat Sharpen Chisel | 20 | 250 | |||
Cranked Wide Chisel | 40 | 250 | |||
Hollow Gouge Chisel | 22 | 250 | |||
Winged Gouge Chisel | 22 | 250 | |||
Channel Chisel | 22 | 250 | |||
Slotting Chisel | 27 | 250 | |||
Groove Edge | 32 | 130 | |||
200 | |||||
Tile Chisel | 40 | 260 | |||
Spade Chisel | 40 | 250 | |||
Wide Chisel | 75 | 165 | |||
250 | |||||
Wide Bend 15° Chisel | 75 | 165 | |||
250 | |||||
* Custom-tailor would be available against customers’ requirements |
1. 40mm flat Breaker Hammer Bit is ideal for starting holes in concrete slabs and for general chipping and demolition work.
2. Flat Chisel is ideal for general chiseling and breaking work in brickwork, concrete, and loose stone.
3. Gouge Chisel is ideal for cutting narrow channels into the concrete.
4. Fully heat treatment improves core strength for maximum durability and extended life.
5. Forged from superior-grade steel, the working points of our chisels can be re-sharpened for longevity
6.Compatible with all SDS-Plus style chucks.
1. Suitable for hammer machines.
2. Other sizes are available upon your request.
3. We have a strict quality control system, to ensure quality stable.
4. The inspection report provided available.
5. Packing, Artwork design free.
How to Use:
■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.
For your Safety:
We recommends the use of following personal protective equipment:
■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)
Important Note:
Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.