Rotary Hammer Drill Bits
40Cr Steel SDS Plus Electric Drill Bits and SDS Point Flat Chisel Set with Storage Case for Concrete Masonry Drilling
- 40Cr with YG8 carbide tip, sturdy and durable.
- With heat treatment improves core strength for maximum durability and extended life.
- The SDS Plus shank is suitable for most rotary hammer drills and meets most of your needs.
- All the bits and chisels are fixed in the slots in the case.
- This set is perfect for working on concrete, masonry, wall, bricks, stone, and roads.
- Product Details
- Factory
- Material
Product Description
This quality sds plus chisel set is a great additional item at home, for all your masonry needs. With this durable drill bits you can drill into toughest material. Use to drill into concrete and bricks. Everything in one hard plastic carry case including: SDS Drill Bits Sizes: 5X110 mm, 6X110 mm, 7X110, 8X110, 6X160 mm, 7X160 mm, 8X160 mm, 10X160 mm, 12X160 mm, 14X160 mm, 16X160 mm. Flat Chisel 250 mm. Bull Point Chisel 250 mm
Product Name
|
40Cr Steel SDS Plus Electric Drill Bits and SDS Point Flat Chisel Set with Storage Case for Concrete Masonry Drilling
|
Material
|
40Cr Steel with Tungsten Carbide Tip
|
Color
|
Sand Blasted
|
Name
|
SDS Plus Drill Bits and SDS Chisel Set
|
Item Dimensions
|
Length: 10.63′ Width: 1.77″, Height:7.28″.
|
Used
|
Drill into concrete and bricks
|
Product Size | |||||
Diameter | Flute Length | Overall Length | Diameter | Flute Length | Overall Length |
mm | mm | mm | Inch | Inch | Inch |
4.0-10.0 | 50 | 110 | 5/32″-3/8″ | 2″ | 4″ |
4.0-16.0 | 100 | 160 | 5/32″-5/8″ | 4″ | 6″ |
5.0-26.0 | 150 | 210 | 3/16″-1″ | 6″ | 8″ |
6.0-26.0 | 200 | 260 | 1/4″-1″ | 8″ | 10″ |
6.0-26.0 | 250 | 310 | 1/4″-1″ | 10″ | 12″ |
6.0-26.0 | 290 | 350 | 1/4″-1″ | 12″ | 14″ |
6.0-26.0 | 350 | 410 | 1/4″-1″ | 10″ | 12″ |
8.0-30.0 | 390 | 450 | 5/16″-1-1/8″ | 12″ | 14″ |
8.0-30.0 | 540 | 600 | 5/16″-1-1/8″ | 14″ | 16″ |
10.0-30.0 | 740 | 800 | 3/8″-1-1/8″ | 16″ | 18″ |
10.0-30.0 | 940 | 1000 | 3/8″-1-1/8″ | 22″ | 24″ |
10.0-40.0 | 1140 | 1200 | 3/8″-1-3/4″ | 24″ | 26″ |
* Custom-tailor would be available against customers’ requirements |
Product Size | |||||
SDS Plus Chisel | |||||
Item | Head Diameter (mm) | Total Length (mm) | Picture | ||
Point Chisel | / | 140 | |||
250 | |||||
Flat Chisel | 20 | 140 | |||
250 | |||||
40 | 140 | ||||
250 | |||||
Flat Sharpen Chisel | 20 | 250 | |||
Cranked Wide Chisel | 40 | 250 | |||
Hollow Gouge Chisel | 22 | 250 | |||
Winged Gouge Chisel | 22 | 250 | |||
Channel Chisel | 22 | 250 | |||
Slotting Chisel | 27 | 250 | |||
Groove Edge | 32 | 130 | |||
200 | |||||
Tile Chisel | 40 | 260 | |||
Spade Chisel | 40 | 250 | |||
Wide Chisel | 75 | 165 | |||
250 | |||||
Wide Bend 15° Chisel | 75 | 165 | |||
250 | |||||
* Custom-tailor would be available against customers’ requirements |