1. Body Material:40Cr Steel with Heat Treatment
2. Tip Material: Tungsten Carbide
3. Process: Milled Flutes and Welded Tip
4. Tip Type: Single Tip
5. Flute Type: S4 Flute, L Flute, U Flute
6. Shank: SDS Plus Shank
7. Surface Finish: Sand Blasted
8. Package: in PVC Pouch, Plastic Box, Individually in Skin Card, Double Blister, Clamshell, Metal Box
11mm SDS Drill Bit
SDS Plus U Flute Single Tip Masonry Concrete Drill Bit
- Product Details
- Factory
- Material
| Product Description | ||||
| More Choice For You: Home > SDS Hammer Drill Bit | ||||
|
Product Name |
SDS Plus U Flute Single Tip Masonry Concrete Drill Bit | |||
| Body Material |
40Cr Steel with Heat Treatment |
|||
| Tip Material | Tungsten Carbide | |||
| Process | Milled Flutes and Welded Tip | |||
| Tip Type | Single Tip (We Also Have Cross Tip) | |||
| Flute Type | U Flute (We Also Have L Flute, Double Flute, S4 Flute) | |||
| Shank | SDS Plus Shank (We Also Have SDS Max Shank) | |||
| Size | 4*110mm to 40*1200mm (5/32″ * 4″ to 1 3/4″ * 40″) | |||
| Surface Finish | Sand Blasted | |||
| Package |
One Piece in One PVC Pouch Or Plastic Hanger or PVC Tube or PVC Double Blister |
|||
| Feature | 1. The SDS Plus drill bit will drill holes in concrete faster and easier. 2. Carbide-tipped crown bit heads more stable, harder, more durable, extra-long tool life. 3. The wider and deeper U-shaped flute design cleans debris out fast for easier, efficient drilling, work time longer. 4. Ideal for drilling holes in concrete, brick, stone, and masonry. 5. The larger grooves allow bits to slip in the chuck when working, enhancing the drilling torque and hammering energy. |
|||
| Product Size | |||||
| Diameter | Flute Length | Overall Length | Diameter | Flute Length | Overall Length |
| mm | mm | mm | Inch | Inch | Inch |
| 4.0-10.0 | 50 | 110 | 5/32″-3/8″ | 2″ | 4″ |
| 4.0-16.0 | 100 | 160 | 5/32″-5/8″ | 4″ | 6″ |
| 5.0-26.0 | 150 | 210 | 3/16″-1″ | 6″ | 8″ |
| 6.0-26.0 | 200 | 260 | 1/4″-1″ | 8″ | 10″ |
| 6.0-26.0 | 250 | 310 | 1/4″-1″ | 10″ | 12″ |
| 6.0-26.0 | 290 | 350 | 1/4″-1″ | 12″ | 14″ |
| 6.0-26.0 | 350 | 410 | 1/4″-1″ | 10″ | 12″ |
| 8.0-30.0 | 390 | 450 | 5/16″-1-1/8″ | 12″ | 14″ |
| 8.0-30.0 | 540 | 600 | 5/16″-1-1/8″ | 14″ | 16″ |
| 10.0-30.0 | 740 | 800 | 3/8″-1-1/8″ | 16″ | 18″ |
| 10.0-30.0 | 940 | 1000 | 3/8″-1-1/8″ | 22″ | 24″ |
| 10.0-40.0 | 1140 | 1200 | 3/8″-1-3/4″ | 24″ | 26″ |
| * Custom-tailor would be available against customers’ requirements | |||||
Factory
1. Premium 40Cr steel with heat treatment improves core strength for maximum durability and extended life.
2. Hardened, premium carbide insert tip is strong and stays sharp longer for finer material break up and easier drilling. increases strength and durability.
3. Copper braze material gives high heat resistance for reduced tip loss, Carbide tip securely embedded in the steel body.
4.fold spiral flute (S4) for rapid drilling dust removal. With even less vibration and more precise guiding, the stability and service life of the drill bit are increased.
How to Use:
■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.
For your Safety:
We recommends the use of following personal protective equipment:
■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)
Important Note:
Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.
English 
French 
Portuguese 
German 
Spanish 
Turkish