Hex Spade Bit
Wood Spade Paddle Drill Bit with Quick Change Hex Shank and Tri-Point with Cutting Groove
- Constructed from carbon steel with fully heat-treated.
- Ensure longevity and high wear resistance.
- Universal for the most drill driver tool of brands in the markets.
- Optimized largest area groove for efficient and smooth chip removal, faster than standard spade bits.
- Tri-Point with Cutting Groove can create beautiful holes with the reduced breakout.
- Product Details
- Factory
- Material
|
Product Description
|
||||
|
More Choice For You: Home > Wood Drill Bit
|
||||
|
Product Name
|
Hex Shank Center Point Spade Flat Wood Drill Bit for Wood Clean and Fast Drilling
|
|||
|
Material
|
High Carbon Steel with Heat Treatment
|
|||
|
Shank Type
|
Quick Change Hex Shank (We Also Have Hex Shank)
|
|||
|
Head Tip
|
Tri-Point with Cutting Groove (We Also Have Center Point, Tri-Point)
|
|||
|
Surface Finish
|
Bright (We Also Have Titanium Coated, Black Oxide)
|
|||
|
Package
|
One Piece in One PVC Pouch or PVC Skin Card or Paper Sandwich or PVC Double Blister
|
|||
| Product Size | |||||||||||||
| Overall Length | 101mm/152mm/304mm/406mm | ||||||||||||
| Diameter | mm | 6 | 8 | 10 | 11 | 12 | 13 | 14 | 16 | 18 | 19 | 20 | 22 |
| 24 | 25 | 26 | 28 | 30 | 32 | 34 | 35 | 36 | 38 | 40 | |||
| Overall Length | 4″/6″/12″/16″ | ||||||||||||
| Diameter | Inch | 1/4″ | 5/16″ | 3/8″ | 7/16″ | / | 1/2″ | 9/16″ | 5/8″ | 11/16″ | 3/4″ | 13/16″ | 7/8″ |
| 15/16″ | 1″ | / | 1-1/8″ | 1-3/16″ | 1-1/4″ | / | 1-3/8″ | / | 1-1/2″ | 1-9/16″ | |||
| * Custom-tailor would be available against customers’ requirements | |||||||||||||
Factory
1. Expert Quality, manufactured from 45# special carbon steel hardened and tempered.
2. Full-length heat treatment guards against bending bit in heavy-duty applications.
3. The precision ground central point with optimized design for faster cutting performance.
4. Double cutting spurs scribe the outside of the hole reducing breakout.
5. Quick-change shank reduces slipping in standard chucks and is compatible with all 1/4″ quick-change chucks and Extension, including impact drills.
6. Designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain.
7. Hang hole allows for bit storage & wire pulling
How to Use:
■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.
For your Safety:
We recommends the use of following personal protective equipment:
■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)
Important Note:
Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.
English 
French 
Portuguese 
German 
Spanish 
Turkish