1. Material: High Carbon Steel With Heat Treatment
2. Shank Type: Hand Use Shank
3. Flute Type: Single Flute with Stem
4. Head Tip: Single Spur with Screw Point
5. Surface Finish: Black & Bright
Hand Use Scotch Eye Pattern Wood Ring Auger Drill Bit for Wood Drilling
- Product Details
- Factory
- Material
Product Description
|
||||
More Choice For You: Home > Wood Drill Bit
|
||||
Product Name
|
Hand Use Scotch Eye Pattern Wood Ring Auger Drill Bit for Wood Drilling
|
|||
Material
|
High Carbon Steel With Heat Treatment
|
|||
Shank Type
|
Hand Use Shank
|
|||
Flute Type
|
Single Flute with Stem
|
|||
Head Tip
|
Single Spur with Screw Point
|
|||
Surface Finish
|
Bright
|
|||
Features
|
1. Using by hand conveniently 2. Screw point tip allows the bit to self-feed for ease of drilling.
3. Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications
4. Made from high-quality high carbon steel with heat treatment
5. Made from hardened steel, quality can be guaranteed
|
Product Size | |||
Diameter | Overall Length | Diameter | Overall Length |
mm | mm | Inch | Inch |
6-26 | 100 | 1/4″-1″ | 4″ |
6-40 | 125 | 1/4″-1-9/16″ | 5″ |
6-40 | 155 | 1/4″-1-9/16″ | 6″ |
6-40 | 200 | 1/4″-1-9/16″ | 8″ |
6-40 | 230 | 1/4″-1-9/16″ | 9″ |
6-40 | 300 | 1/4″-1-9/16″ | 12″ |
6-40 | 400 | 1/4″-1-9/16″ | 16″ |
6-40 | 460 | 1/4″-1-9/16″ | 18″ |
6-40 | 500 | 1/4″-1-9/16″ | 20″ |
6-40 | 600 | 1/4″-1-9/16″ | 24″ |
6-40 | 800 | 1/4″-1-9/16″ | 32″ |
6-40 | 1000 | 1/4″-1-9/16″ | 40″ |
* Custom-tailor would be available against customers’ requirements |
Factory
1. Designed for use by hand.
2. Made from high quality, hardened steel for added durability.
3. Remove the hand Use shank and use it in an electric drill.
4. The extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications.
5. The solid center design provides extra rigidity while boring.
6. Screw point tip allows the bit to self-feed for ease of drilling.
7. Single spur, cutter, and side lip are designed for boring through creosoted poles without clogging, binding, or stopping to clear chips.
How to Use:
■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.
For your Safety:
We recommends the use of following personal protective equipment:
■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)
Important Note:
Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.