1 Inch Spade Bit
Hexagon Shank Center Point Spade Flat Wood Drill Bit for Wood Clean and Fast Drilling Hole
- Constructed from carbon steel with heat treated for capability and durability, head with a polished surface for longevity.
- The flat paddle design features a sharp cutting edge, ensures the hole smooth clean.
- It’s universal for the most drill driver tool of brands in the markets.
- Self-centering spade tip for spot-on starts and the bits evacuate the material as it cuts.
- The sharp bit allows for accurate drilling to most types of wood, and also fiberglass, PVC (polyvinyl chloride), and soft metals such as aluminum.
- Product Details
- Factory
- Material
|
Product Description
|
||||
|
More Choice For You: Home > Wood Drill Bit
|
||||
|
Product Name
|
Hexagon Shank Center Point Spade Flat Wood Drill Bit for Wood Clean and Fast Drilling Hole
|
|||
|
Material
|
High Carbon Steel with Heat Treatment
|
|||
|
Shank Type
|
Hex Shank (We Also Have Quick Change Hex Shank)
|
|||
|
Head Tip
|
Tri-Point (We Also Have Center Point, Tri-Point with Cutting Groove)
|
|||
|
Surface Finish
|
Bright (We Also Have Titanium Coated, Black Oxide)
|
|||
|
Package
|
One Piece in One PVC Pouch or PVC Skin Card or Paper Sandwich or PVC Double Blister
|
|||
| Product Size | |||||||||||||
| Overall Length | 101mm/152mm/304mm/406mm | ||||||||||||
| Diameter | mm | 6 | 8 | 10 | 11 | 12 | 13 | 14 | 16 | 18 | 19 | 20 | 22 |
| 24 | 25 | 26 | 28 | 30 | 32 | 34 | 35 | 36 | 38 | 40 | |||
| Overall Length | 4″/6″/12″/16″ | ||||||||||||
| Diameter | Inch | 1/4″ | 5/16″ | 3/8″ | 7/16″ | / | 1/2″ | 9/16″ | 5/8″ | 11/16″ | 3/4″ | 13/16″ | 7/8″ |
| 15/16″ | 1″ | / | 1-1/8″ | 1-3/16″ | 1-1/4″ | / | 1-3/8″ | / | 1-1/2″ | 1-9/16″ | |||
| * Custom-tailor would be available against customers’ requirements | |||||||||||||
1. Expert Quality, manufactured from 45#special carbon steel hardened and tempered.
2. Full-length heat treatment guards against bending bit in heavy-duty applications.
3. The precision ground central point with optimized design for faster cutting performance.
4. Hex shank provides better chuck grip and reduces slippage.
5. Designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain.
6. Hang hole allows for bit storage & wire pulling.
How to Use:
■ Follow carefully the instructions given in the machine handbook.
■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
■ Tighten only with the tool supplied with the machine.
■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
■ Keep flanges and screw threads clean and free of burrs and rust.
■ Replace distorted or damaged flanges before fitting the wheel.
For your Safety:
We recommends the use of following personal protective equipment:
■ Eye protection
■ Ear protection (ear sets)
■ Hand protection (gloves)
■ Lung protection (dust mask, also called respirator)
Important Note:
Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
Ensure that no other person is at risk, especially near the machine while working.
English 
French 
Portuguese 
German 
Spanish 
Turkish