Drill Bits for Hardened Steel

DIN 338 HSS Straight Shank Twist Hss Drill Bit for Steel Metal Drilling

  • Parabolic flute design increases chip ejection in metal and wood drilling applications.
  • The coating helps resist corrosion and increase durability.
  • 135° Split-point tips drill on contact and prevent walking on the hard surface you’re working on.
  • For much faster cutting and extra long life span.
  • Hss4241, Hss4341, M2, M35, M42 all can produce.

 

 

Product Name
DIN 338 HSS Straight Shank Twist Hss Drill Bit for Steel Metal Drilling
Surface
White, black, Tin coated, amber finish, gold color, or as your request
Process
Roll forged, edge ground, fully ground, milled
Sharpening
118 degree, 135 degrees, turbo max, or as your request
Standards

DIN338,DIN1897,DIN340,DIN1869,DIN345,DIN333

Jobber Length, Screw Machine Length, Taper Length, Aircraft Extension, Taper Shank
Material
HSS4241 , HSS4341 , HSS6542(M2) , HSS CO5% (M35) , HSS CO8%(M42)
Shank
Straight Shank (Parallel Shank), Reduced Shank, Hex Shank, 1/4″ Quick Change Shank, 3 Flats Shank, 1/2″ Shank, 3/8″ Shank
Use
For drilling metal, wood, stainless steel, and so on
Helix Angle
Type N. Type W, Type H.
Rotating
Right Hand, Left Hand
Flute
Normal Parabolic
Product Size
DIN338
Diameter(mm) Flute Length(mm) Overall Length(mm) Diameter(mm) Flute Length(mm) Overall Length(mm)
0.5 6 22 9.5 81 125
1.0 12 34 10.0 87 133
1.5 20 43 10.5 87 133
2.0 24 49 11.0 94 142
2.5 30 57 11.5 94 142
3.0 33 61 12.0 101 151
3.2 36 65 12.5 101 151
3.5 39 70 13.0 101 151
4.0 43 75 13.5 108 160
4.2 43 75 14.0 108 160
4.5 47 80 14.5 114 169
4.8 52 86 15.0 114 169
5.0 52 86 15.5 120 178
5.2 52 86 16.0 120 178
5.5 57 93 16.5 125 184
6.0 57 93 17.0 125 184
6.5 63 101 17.5 130 191
7.0 69 109 18.0 130 191
7.5 69 109 18.5 135 198
8.0 75 117 19.0 135 198
8.5 75 117 19.5 140 205
9.0 81 125 20.0 140 205
Jobber Length Fraction
Diameter (Inch) Flute Length(Inch) Overall Length(mm) Diameter (Inch) Flute Length(Inch) Overall Length(mm)
3/64″ 3/4″ 1-3/4″ 25/64″ 3-3/4″ 5-1/8″
1/16″ 7/8″ 1-7/8″ 13/32″ 3-7/8″ 5-1/4″
5/64″ 1″ 2″ 27/64″ 3-15/16″ 5-3/8″
3/32″ 1-1/8″ 2-1/4″ 7/16″ 4-1/16″ 5-1/2″
7/64″ 1-1/2″ 2-5/8″ 29/64″ 4-3/16″ 5-5/8″
1/8″ 1-5/8″ 2-3/4″ 15/32″ 4-5/16″ 5-3/4″
9/64″ 1-3/4″ 2-7/8″ 31/64″ 4-3/8″ 5-7/8″
5/32″ 2″ 3-1/8″ 1/2″ 4-1/2″ 6″
11/64″ 2-1/8″ 3-1/4″ 33/64″ 4-13/16″ 6-5/8″
3/16″ 2-5/16″ 3-1/2″ 17/32″ 4-13/16″ 6-5/8″
13/64″ 2-7/16″ 3-5/8″ 35/64″ 4-13/16″ 6-5/8″
7/32″ 2-1/2″ 3-3/4″ 9/16″ 4-13/16″ 6-5/8″
15/64″ 2-5/8″ 3-7/8″ 37/64″ 4-13/16″ 6-5/8″
1/4″ 2-3/4″ 4″ 19/32″ 5-3/16″ 7-1/8″
17/64″ 2-7/8″ 4-1/8″ 39/64″ 5-3/16″ 7-1/8″
9/32″ 2-15/16″ 4-1/4″ 5/8″ 5-3/16″ 7-1/8″
19/64″ 3-1/16″ 4-3/8″ 41/64″ 5-3/16″ 7-1/8″
5/16″ 3-3/16″ 4-1/2″ 21/32″ 5-3/16″ 7-1/8″
21/64″ 3-5/16″ 4-5/8″ 43/64″ 5-5/8″ 7-5/8″
11/32″ 3-7/16″ 4-3/4″ 11/16″ 5-5/8″ 7-5/8″
23/64″ 3-1/2″ 4-7/8″
3/8″ 3-5/8″ 5″
Jober Length Number
Diameter Flute Length(Inch) Overall Length(mm) Diameter Flute Length(Inch) Overall Length(mm)
1# 2-5/8″ 3-7/8″ 31″ 1-5/8″ 2-3/4″
2# 2-5/8″ 3-7/8″ 32″ 1-5/8″ 2-3/4″
3# 2-1/2″ 3-3/4″ 33″ 1-1/2″ 2-5/8″
4# 2-1/2″ 3-3/4″ 34″ 1-1/2″ 2-5/8″
5# 2-1/2″ 3-3/4″ 35″ 1-1/2″ 2-5/8″
6# 2-1/2″ 3-3/4″ 36″ 1-7/16″ 2-1/2″
7# 2-7/16″ 3-5/8″ 37″ 1-7/16″ 2-1/2″
8# 2-7/16″ 3-5/8″ 38″ 1-7/16″ 2-1/2″
9# 2-7/16″ 3-5/8″ 39″ 1-3/8″ 2-3/8″
10# 2-7/16″ 3-5/8″ 40″ 1-3/8″ 2-3/8″
11# 2-5/16″ 3-1/2″ 41″ 1-3/8″ 2-3/8″
12# 2-5/16″ 3-1/2″ 42″ 1-1/4″ 2-1/4″
13# 2-5/16″ 3-1/2″ 43″ 1-1/4″ 2-1/4″
14# 2-3/16″ 3-3/8″ 44″ 1-1/8″ 2-1/8″
15# 2-3/16″ 3-3/8″ 45″ 1-1/8″ 2-1/8″
16# 2-3/16″ 3-3/8″ 46″ 1-1/8″ 2-1/8″
17# 2-3/16″ 3-3/8″ 47″ 1″ 2″
18# 2-1/8″ 3-1/4″ 48″ 1″ 2″
19# 2-1/8″ 3-1/4″ 49″ 1″ 2″
20# 2-1/8″ 3-1/4″ 50″ 1″ 2″
21# 2-1/8″ 3-1/4″ 51″ 1″ 2″
22# 2″ 3-1/8″ 52″ 7/8″ 1-7/8″
23# 2″ 3-1/8″ 53″ 7/8″ 1-7/8″
24# 2″ 3-1/8″ 54″ 7/8″ 1-7/8″
25# 1-7/8″ 3″ 55″ 7/8″ 1-7/8″
26# 1-7/8″ 3″ 56″ 3/4″ 1-3/4″
27# 1-7/8″ 3″ 57″ 3/4″ 1-3/4″
28# 1-3/4″ 2-7/8″ 58″ 11/16″ 1-5/8″
29# 1-3/4″ 2-7/8″ 59″ 11/16″ 1-5/8″
30# 1-5/8″ 2-3/4″ 60″ 11/16″ 1-5/8″
Jobber Length Letter
Diameter Flute Length(Inch) Overall Length(mm) Diameter (Inch) Flute Length(Inch) Overall Length(mm)
A 2-5/8″ 3-7/8″ N 3-1/16″ 4-3/8″
B 2-3/4″ 4″ O 4-1/2″ 4-1/2″
C 2-3/4″ 4″ P 4-5/8″ 4-5/8″
D 2-3/4″ 4″ Q 4-3/4″ 4-3/4″
E 2-3/4″ 4″ R 4-3/4″ 4-3/4″
F 2-7/8″ 4-1/8″ S 4-7/8″ 4-7/8″
G 2-7/8″ 4-1/8″ T 4-7/8″ 4-7/8″
H 2-7/8″ 4-1/8″ U 5″ 5″
I 2-7/8″ 4-1/8″ V 3-5/8″ 5″
J 2-7/8″ 4-1/8″ W 3-3/4″ 5-1/8″
K 2-15/16″ 4-1/4″ X 3-3/4″ 5-1/8″
L 2-15/16″ 4-1/4″ Y 3-7/8″ 5-1/4″
M 3-1/16″ 4-3/8″ Z 3-7/8″ 5-1/4″
* Custom-tailor would be available against customers’ requirements

 

 

en_USEnglish
Scroll to Top

Get a Quick Quote!

x