What is a Diamond Saw Blade Maintenance Requirements and Use Methods?

First Let us Understand the Formation of the Diamond Cutting Disc

We should know that diamond cutting disc is a cutting tool, widely used in the processing of concrete, refractory materials, stone, ceramics, and other hard and brittle materials.

With the development of society and the progress of human beings, users have been increasingly pursuing efficiency, that is, sharpness, as their goal.

The Traditional Diamond Saw Blade Manufacturing Process

1. Mix powder and diamond
2. Solid phase sintering, sometimes also has a small amount of liquid phase

The choice of metal powder and diamond formula is the key to improve the sharpness of the diamond cutting disc

Secondly What are the Maintenance Methods for Diamonds

Diamond Saw Blade is a Mineral Composed of Carbon Element, It’s an Allot Rope of Carbon Element, Commonly Known as Fiamond

1. If they are not in use, they should not touch the diamond saw blades.
2. After cutting with a diamond saw blade, protect the base material.Put it down gently.
3. When dry cutting, please do not cut continuously for a long time, so as not to affect the service life and cutting effect.
4. When wet cutting, water cutting should be added to prevent leakage.
5. The chip discharge slot and slag suction device of the equipment ensure a smooth flow.
6. If cutting aluminum alloy or other metals, use a special cooling lubricant.
7. When the diamond saw blade starts cutting and stops cutting, do not feed too fast to avoid broken teeth and damage.
8. If abnormal sounds and vibrations are found,the operation should be terminated immediately.
9. During work, do not apply side pressure or curve cutting.

Thirdly the Maintenance Method of Diamond Cutting Disc

1. Redress it in time, when the diamond cutting disc is no longer sharp and the cutting surface is rough.
2. The inner diameter of the diamond saw blade and the positioning hole processing should be performed by the factory.
3. If the diamond saw blade is not used immediately, lay it flat or hang it with the inner hole.